OFF 30% Continuous ABSORPTIVE Jetlasers safety goggles at 200-540nm, protects you from laser danger of 532nm (green), 473nm (blue), 405NM(bluray), etc.
Moderate and high-power lasers(any >5mw laser) are potentially hazardous because they can damage the retina of the eye, or even the skin. The "classes" of laser is defined by their power and wavelength. These regulations also prescribe required safety measures, such as labeling lasers with specific warnings, and wearing laser safety goggles when operating lasers.
Jetlasers laser safety goggles employs the absorptive tech and Suitable over prescription spectacles and low cost, these are ideal general purpose laser safety protection. Indirect lateral ventilation prevents formation of condensed moisture inside the goggles.
Jetlasers goggles are sent within a protective case along with a piece of micro-fiber cloth for easy cleaning.
|
Wavelengths Protected
|
|
532nm (green), 473nm (blue),405NM(bluray), etc.
|
|
Jetlasers Goggles Features
|
|
Optical Density 200-540 nm OD4+
|
|
Visible Light Transmittance 30%
|
|
Continuous ABSORPTIVE rather than REFLECTIVE
|
|
Higher visible light transmission rate
|
|
Non-Selective Light Source
|
|
CE-certified
|
Advantages:
Cutting-edge Absorptive Tech employed to the base material-PMMA or PC that consists in Jetlasers goggles. They have some critical advantages.
1. The light source is not selective and can protect from any reflection light or diffuse reflection light.
2. The wear and tear on the lens does not affect the protection at all.
3. Higher visible light transmission rate.
Care Instructions:
When not being used, the laser safety glasses should be stored in their protective case and in an area where the temperature does not exceed 80 °F (26.6°C). The laser safety glasses can be cleaned using 91% isopropyl alcohol and wiped with a cotton swab.
Goggles Gallary:
This product was added to our catalog on Friday 02 October, 2009.
