200-380nm&600-760nm Laser Goggles

OFF 30% Continuous ABSORPTIVE Jetlasers safety goggles at 190-380nm & 600-760nm, protects you from laser danger of YAG laser(266nm), He-Ne laser(632.8nm), Ruby laser(694nm), Alexandrite laser(755nm), Excimer, UV, and CO2 lasers, etc.

Jetlasers 190-380nm & 600-760nm laser safety goggles are comfortable padded goggles with a coated scratch-resistant polycarbonate Excimer laser filter. Lenses have superior optical clarity with virtually no distortion to reduce eye fatigue. It is ideal for use in most laser applications and comfortable for long periods of wear.

Moderate and high-power lasers(any >5mw laser) are potentially hazardous because they can damage the retina of the eye, or even the skin. The "classes" of laser is defined by their power and wavelength. These regulations also prescribe required safety measures, such as labeling lasers with specific warnings, and wearing laser safety goggles when operating lasers.

Jetlasers laser safety goggles employs the absorptive tech and Suitable over prescription spectacles and low cost, these are ideal general purpose laser safety protection. Indirect lateral ventilation prevents formation of condensed moisture inside the goggles.

Jetlasers goggles are sent within a protective case along with a piece of micro-fiber cloth for easy cleaning.

Advantages:

Cutting-edge Absorptive Tech employed to the base material-PMMA or PC that consists in Jetlasers goggles. They have some critical advantages.

1. The light source is not selective and can protect from any reflection light or diffuse reflection light.
2. The wear and tear on the lens does not affect the protection at all.
3. Higher visible light transmission rate.

Care Instructions:
When not being used, the laser safety glasses should be stored in their protective case and in an area where the temperature does not exceed 80 °F (26.6°C). The laser safety glasses can be cleaned using 91% isopropyl alcohol and wiped with a cotton swab.

Goggles Gallary: